Experience
MIG/MAG Welding
Manual MIG/MAG Welding
Manual MIG/MAG welding on carbon steel, stainless steel and aluminium, from thin sheet to heavy plate. Short-circuit, spray and pulsed transfer are chosen to suit the thickness and position, so each joint gets full fusion without excess spatter or distortion.


Industrial Fabrication
Steel frames, platforms, supports, tanks and marine components, built from drawings and welded to an approved procedure. Parts are fitted, tacked and checked for dimensions before full welding, and the weld sequence is planned to keep distortion under control. On site, the work is arranged around existing equipment, access limits and other trades, with safety requirements agreed in advance.
Details for a Quote
Send the material, thickness and quantity, with drawings or photos of the parts. A WPS, if one exists, speeds up the proposal.
Robotic MIG/MAG Welding
Robotic MIG/MAG welding suits repeat parts and long seams, where the same weld must come out the same every time. Fixtures hold each part in a fixed position, and torch angle, travel speed and wire feed are set once and checked on trial pieces before production starts. The result is even bead profiles and fewer repairs.


Weld Quality Control
Quality starts with clean, dry material, correct fit-up and the right wire and gas for the job. During welding, voltage, wire feed, gas flow and interpass temperature are kept within the WPS limits. Finished welds are checked visually and, where required, by magnetic particle, ultrasonic or radiographic testing, with records kept for the client.
MIG/MAG Welding on Site and in the Workshop
Fabrication, repairs and installations in shipyards, plants and workshops, planned around the schedule of each job.
