SHIP REPAIR
Rudder Repair
Crack repair of a ship rudder in Tuzla, Türkiye: a cavity about 400 mm deep and 300 mm wide rebuilt by hand with MMA welding, then heat treated and tested.
Repair Area
Removing the crack left an opening about 400 mm deep and 300 mm wide in the rudder.
- Cavity depth about 400 mm
- Opening width about 300 mm
- Unusually deep weld repair
- Repair carried out in Tuzla



Welding
The cavity was rebuilt by hand with basic low-hydrogen MMA electrodes.
- MMA (stick) welding
- Basic low-hydrogen electrodes
- 120 kg of electrodes used
- Multi-pass build-up



Build-Up
The weld rose about 30 mm per day over 15 to 17 days of continuous work.
- About 30 mm of build-up per day
- 15 to 17 days of welding
- 12 to 14 hours a day
- Layer by layer, pass by pass



Heating
The rebuilt section of the rudder was annealed after welding.
- Annealing of the rebuilt area
- Heat treatment of the repair
- Controlled heating and cooling
- Ready for final testing



Checks
Visual, ultrasonic and penetrant testing of the repaired rudder showed no defects.
- Visual inspection (VT)
- Ultrasonic testing (UT)
- Penetrant testing (PT)
- Excellent inspection results
This content is blocked because it would connect to YouTube.
Rudder Crack Repair Enquiries
Cracked rudders, stern frames or other heavy marine parts: send photos and details to plan the repair.
