Welding Positions 1G to 6G

6G pipe welding

Why Welding Positions Matter

Gravity acts on the weld pool. In the flat position, molten metal stays where it is placed. Vertical and overhead, it wants to run or drop. Welding positions describe the orientation of the joint, and they matter for technique, settings, productivity and welder qualification: a certificate covers only certain positions.

Plate Positions

  • 1G / PA: flat, groove weld on top
  • 2G / PC: horizontal, plate vertical with the weld running horizontally
  • 3G / PF or PG: vertical, welded upwards (PF) or downwards (PG)
  • 4G / PE: overhead

Fillet welds use the same idea with F instead of G: 1F flat, 2F horizontal, 3F vertical, 4F overhead.

overhead welding

Pipe Positions

  • 1G: pipe horizontal and rotated, welded on top
  • 2G / PC: pipe vertical, weld runs horizontally around it
  • 5G / PH or PJ: pipe horizontal and fixed; the welder goes around it through flat, vertical and overhead
  • 6G / H-L045 or J-L045: pipe fixed at 45 degrees; every position is involved at once

ISO 6947 Codes

European standards such as ISO 9606-1 use ISO 6947 codes rather than the AWS-style numbers. PA, PB, PC, PD, PE, PF and PG describe plate and fillet positions. For pipe, PH means vertical up around a fixed horizontal pipe, PJ vertical down, and H-L045 or J-L045 the 45-degree inclined pipe. Knowing both systems avoids confusion on international projects.

vertical up fillet

Why 6G Is the Benchmark

The 6G pipe test is often seen as the hardest qualification, because the welder must handle every position in one joint, with the pool behaving differently at each point. A 6G pipe certificate typically covers most other positions for pipe and plate within its range, which is why many pipe welders aim for it.

From My Experience

Much of my site work is fixed pipe in tight spaces, where the position changes every few centimetres and sometimes the joint has to be welded with a mirror. Practising the overhead section of 5G and 6G pays off more than anything else, because that is where most root defects appear.

5G fixed pipe

Conclusion

Welding positions affect technique and qualification. 1G to 4G cover plate, 5G and 6G fixed pipe, and ISO 6947 codes describe the same positions in European standards. See also ISO 9606-1 welder qualification.

If you found this article useful, feel free to share it with colleagues who work with welders and trainees. — Zisis

Need Help on a Project?

For welding supervision and quality control on marine and industrial work, see Welding Supervision or request a quote.

Scroll to Top