Navacito Rutile Electrode E6013

rutile coated welding electrodes

What Is a Rutile Electrode E6013

Navacito is a medium-coated rutile electrode E6013 for general manual metal arc (MMA) welding. It is used on structural steels, pipe steels and normal-strength shipbuilding grades.

The coating gives a strong, stable arc that holds well in vertical-up welding. This makes it a practical choice for site work on pipelines, for joints in tight spaces with poor access, and for welds that have to pass radiographic testing.

Classification

  • AWS A5.1: E6013
  • ISO 2560 (former edition): E 51 4 R 22
  • DIN 1913 (withdrawn): E 51 43 R3

DIN 1913 has been withdrawn and replaced by EN ISO 2560. Check the current classification on the manufacturer’s datasheet before it goes into a welding procedure.

Base Materials

  • Non-alloy structural steels St 33 to St 52.3 (today S235 to S355 under EN 10025)
  • Boiler plate HI, HII, HIII and 17Mn4
  • Pipe steels St 35 to St 52.4
  • Normal-strength shipbuilding steels, grades A, B, C and D
  • Cast steels GS 38, GS 45 and GS 52
weld coupon quality inspection

Typical Weld Metal Data

Chemical composition (typical, %)

  • C 0.10
  • Mn 0.71
  • Si 0.15
  • S and P below 0.02

Mechanical properties (all-weld metal)

  • Tensile strength: 540 N/mm²
  • Yield strength: 430 N/mm²
  • Elongation (L = 5d): 26%
  • Charpy V impact at +20 °C: 60 J

Current and Positions

Navacito runs on AC or DC, with the electrode on either polarity. Typical current ranges are 50–90 A for Ø2.5 mm and 90–130 A for Ø3.25 mm. For Ø4.0 and Ø5.0 mm, take the range from the manufacturer’s current datasheet.

It welds in the flat, horizontal, vertical-up and overhead positions.

weld slag steel bead

Practical Tips for Vertical-Up Welding

  • Reduce the current by roughly 10–15% compared with the flat position
  • Keep a short arc and a slight side-to-side weave
  • Pause briefly at the edges to avoid undercut
  • Remove slag fully between passes

Where It Is Used

Typical uses are pipe spools and pipelines on site, structural steelwork, boiler plate and repair work on normal-strength ship plate. For higher-strength steels or impact requirements below 0 °C, a low-hydrogen basic electrode is the usual choice.

Rutile or Basic?

Rutile electrodes such as Navacito are easier to strike and re-strike, give a smoother bead and are less sensitive to moisture. Basic low-hydrogen electrodes such as E7018 give tougher weld metal with better crack resistance, and are required for most pressure work, thick sections and high-strength or low-temperature steels. Choosing between them is a question of the job, not of preference.

Storage

Rutile electrodes tolerate normal workshop conditions better than basic types, but damp electrodes still give porosity and an unstable arc. Keep packets closed and dry, and re-dry electrodes that have picked up moisture only as the manufacturer specifies.

steel weld sample inspection

Typical Mistakes

The most common problems with rutile electrodes are using them where a low-hydrogen electrode is specified, running too much current in vertical-up, and leaving slag between passes. All three show up later as defects at inspection.

From My Experience

In my own work, I use rutile electrodes for general repairs, tacking and fit-up, and switch to basic low-hydrogen electrodes as soon as a joint is structural, thick or has impact requirements. On ship repair, that choice is often fixed by the class surveyor before it reaches the welder, and it should be.

Conclusion

Navacito is an all-position rutile electrode for everyday structural, pipe and ship repair work, with a stable arc that suits site conditions. For a wider view of electrode types, see steel welding electrodes.

Always confirm the classification and current ranges on the latest manufacturer datasheet before use.

If you found this article useful, feel free to share it with colleagues who work with welding electrodes. — Zisis

Need Help on a Project?

For MMA/SMAW welding on marine and industrial work, see MMA/SMAW Welding or request a quote.

Scroll to Top